Steel Standards and Research Reports: Stahl-Eisen-Blätter and FOSTA Reports

Besides DIN, EN and ISO standards, there are two further types of technical documents for steel: the Stahl-Eisen-Blätter of the Stahlinstitut VDEh and the research reports of FOSTA, the German Research Association for Steel Application. This article explains the abbreviations SEW, SEP, SEL, SEE and SEB and what FOSTA reports are. It also presents a selection of frequently searched documents with a direct link to the Matplus shop.

What are Stahl-Eisen-Blätter?

The Stahl-Eisen-Blätter (steel-iron sheets) are technical guidelines published by the Stahlinstitut VDEh. They are developed in technical and scientific committees in collaboration with steel users. According to the VDEh, they represent the state of the art, similar to standards, and serve to unify test methods and to define properties of steels. Their stated objectives also include preliminary work for DIN, CEN and ISO standards and a faster implementation of new knowledge into application. The complete Stahl-Eisen rulebook comprises more than 240 documents.

The sheets are divided into five series. The descriptions follow the explanations of the VDEh:

SeriesNameContent
SEWStahl-Eisen-Werkstoffblätter (material specifications)property profiles of steels for which no standard exists yet
SELStahl-Eisen-Lieferbedingungen (delivery conditions)like SEW: unifying the functional characteristics of steels in pre-standardisation
SEPStahl-Eisen-Prüfblätter (test specifications)guidelines for carrying out tests to determine certain material properties
SEEStahl-Eisen-Einsatzblätter (appropriate usage)selection of steels for tools used in certain forming processes
SEBStahl-Eisen-Betriebsblätter (operating sheets)requirements for the planning, production, assembly and maintenance of metallurgical plants

What Stahl-Eisen-Blätter are used for

SEW and SEL describe steels that are important for steel producers, processors and users but have not yet been standardised. They take into account the knowledge of both steel producers and steel users. The aim is a targeted use of these steels.

SEP standardise test conditions in pre-standardisation so that test results are comparable. According to the VDEh, they are often incorporated into customer specifications and significantly reduce the testing effort for steel producers and users. Values determined according to SEP are required, for example, for the design and technical security of components. How such values are used further in databases and simulation is described in the article on the materials database.

SEB contain dimensions, materials and calculation methods as well as specifications for ordering, delivery and quality assurance. Designing according to SEB ensures the interchangeability of connecting dimensions. When cited, SEB can become part of contract documents.

How steel grades are identified unambiguously by steel name and material number is explained in the article on steel material numbers.

What are FOSTA research reports?

FOSTA – Forschungsvereinigung Stahlanwendung e. V. was founded in 1968 as a registered non-profit association. According to its statutes, its purpose is to promote research and development, in particular the application technology of iron and steel. Its work is financed by the steel producing and steel processing industry. Its research areas are material behaviour, manufacturing, transport, the construction sector and the environment.

A detailed research report is produced for each research project and is available in electronic form. The reports carry a number, for example P 1478. FOSTA offers all available reports for a nominal fee and refers to the list of FOSTA research reports on stahldaten.de. Users of StahlDat SX Professional can read all digitally available FOSTA reports in full text.

Where to get the documents

According to the Stahlinstitut VDEh, all valid Stahl-Eisen-Blätter can be obtained from the Matplus shop or from DIN Media. The FOSTA research reports are also available in the Matplus shop. Detailed lists with shop links are available on stahldaten.de:

Selection: frequently searched documents

The selection is based on how often the product pages in the Matplus shop were shown in Google Search between April and October 2026. It does not replace the detailed lists.

Stahl-Eisen-Werkstoffblätter (SEW)

SheetTitle
SEW 088Weldable unalloyed and low-alloy steels. Recommendations for processing, especially for fusion welding
SEW 550Steels for larger forgings – Quality specifications
SEW 470Heat-resistant rolled and forged steels
SEW 520High-strength cast steel with good weldability – Technical delivery conditions
SEW 028Unalloyed and alloyed pressure vessel steels for use at moderately elevated and elevated temperatures – Technical delivery conditions for flat steel products
SEW 400Stainless rolled and forged steels
SEW 685Steel castings with high impact strength at low temperatures – Technical delivery conditions
SEW 410Stainless cast steel – Technical delivery conditions

Stahl-Eisen-Prüfblätter (SEP)

SheetTitle
SEP 1390Weld-on bending test
SEP 1927Ultrasonic immersion testing for the determination of the macroscopic cleanliness of rolled or forged steel bars
SEP 1220Testing and documentation guideline for the joining suitability of thin steel sheets Part 1: General information
SEP 1923Ultrasonic testing of forgings with higher requirements, especially for components in turbine and generator systems
SEP 1920Ultrasonic testing of rolled semi-finished products for internal material defects
SEP 1584Blue cracking test for testing steels for macroscopic non-metallic inclusions
SEP 1325Drop weight test according to W.S. Pellini
SEP 1571Evaluation of inclusions in special steels based on their surface areas – Part 1: Basics

SEP 1220 and SEP 1571 consist of several parts; the other parts are listed in the technical standards list.

Stahl-Eisen-Betriebsblätter (SEB)

SheetTitle
SEB 057 602Nuts and bolts – Selection
SEB 057 820Machine foundations – Anchor lengths for machine and steel structures – Guidelines
SEB 058 702Steelworks – Crane systems – Crane and trolley buffers – Connection dimensions
SEB 055 501Surface finish and tolerances – Technical requirements and specifications in drawings
SEB 058 301Rope drives for cranes – Selection and design

FOSTA research reports

ReportTitle
P 03Calculation principles for honeycomb beams
P 1478Consistent design model for steel composite beams with web openings
P 1632Effect of cryogenic treatment in the heat treatment process of tool steels on corrosion resistance, dimensional and geometrical stability and fracture toughness
P 1521Integral sheet pile abutments of modular composite bridges for a time-efficient construction process
P 1589Development of a methodical approach for spatter prevention in resistance spot welding through multi-parameter process analysis using artificial intelligence
P 1281Integral and holistic planning of road bridges based on hierarchical models
P 931Numerical optimisation of the deep drawing process when using drawing beads by developing a well-founded extended replacement model
P 1573Manufacturing of high-strength, ductile components from a low-alloy tempering steel using innovative quenching & partitioning press hardening strategies

More reports can be found in the list of FOSTA research reports and in the Matplus shop.

Combining standards, test data and materials data

According to the VDEh, values determined according to Stahl-Eisen test specifications are required, among other things, for the design and technical security of components. The Matplus materials databases and StahlDat SX provide reference data on steel grades, and in materials data management they can be combined with your own test data.

Contact us

Frequently asked questions

Who publishes the Stahl-Eisen-Blätter?

They are published by the Stahlinstitut VDEh (Steel Institute VDEh) in Düsseldorf. The sheets are developed in technical and scientific committees in collaboration with steel users. Every expert, company or research institution interested in a sheet can contribute to the work.

What is the difference between SEW and SEP?

A Stahl-Eisen-Werkstoffblatt (SEW, material specification) describes the property profile of steels for which no standard exists yet. A Stahl-Eisen-Prüfblatt (SEP, test specification) defines how a test to determine certain material properties is carried out so that the results are comparable.

Where can I buy Stahl-Eisen-Blätter and FOSTA reports?

According to the Stahlinstitut VDEh, all valid Stahl-Eisen-Blätter can be obtained from the Matplus shop or from DIN Media. FOSTA offers its available research reports for a nominal fee via stahldaten.de; they are purchased in the Matplus shop.

More articles

CCT and TTT Diagrams: Understanding and Reading Transformation Diagrams

Digital Product Passport: ESPR, Timeline and Materials Data

Materials Data Management: Basics, Requirements and Implementation